Structural Repairs That Secure and Rebuild
Storm damage repair in Lewistown for homes where wind exposes framing and roof edges
Storm damage often exposes framing and roof edges in older Lewistown homes and rental buildings, where years of weather have already weakened fasteners and trim before wind or hail completes the failure. Repairs must address both the structural damage and the water intrusion that follows. Big Sky Carpentry/Remediation makes storm damage repairs in Lewistown and across Central Montana, performing structural and finish work on the damaged portion of the property—framing, sheathing, siding, trim, doors, windows and interior finishes.
The owner-operated crew first assesses the damaged area and secures the structure with temporary coverings or bracing, then removes material that is no longer sound. Repairs include replacing framing members that have split or shifted, installing new sheathing where the old has delaminated, and rebuilding exterior trim to match the original profile and exposure. Doors and windows are repaired or replaced, and interior drywall and paint are restored to match adjacent surfaces.
Request a damage assessment to determine which portions of the structure require repair and which can remain.
Structural repairs restore the load path that was interrupted when wind lifted sheathing, shifted framing, or tore away connections between roof, wall and foundation. The crew replaces damaged rafters, studs and plates, installs new sheathing with proper nailing patterns, and reconnects exterior trim so that the building envelope is once again sealed against water and air infiltration.
Once repairs are finished, the roof line is straight with no visible sag or gaps, siding is flush and tight with no open seams, and trim sits flat against the wall with no lifted edges. Inside, ceilings and walls are smooth and painted to match, with no visible water staining or texture discontinuity where repairs were made.
Repairs are limited to the damaged portion rather than extending across the entire structure, which reduces cost and disruption while addressing the specific areas where wind or hail caused failure. The crew documents the extent of damage and photographs the repaired areas for insurance claims.
Answers About How the Work Is Done
Storm damage repair involves sequencing structural work, securing the building envelope, and matching finishes to the rest of the property. These questions explain what happens during the repair.
What does the crew do first after storm damage occurs?
The structure is secured with temporary coverings or bracing to prevent further water intrusion or structural shifting while the full extent of damage is assessed.
How do you know which framing members need replacement?
Framing is inspected for splits, compression, shifted connections, or fastener pull-out, and any member that no longer carries load properly is removed and replaced.
Why is sheathing replaced even if it looks mostly intact?
Sheathing that has delaminated or lost nailing loses its ability to transfer wind loads and brace the structure, so it is removed and replaced with new material fastened to code.
What happens to windows and doors that were damaged in the storm?
Damaged units are removed and replaced with new windows or doors sized to the existing rough opening, or repaired if only trim or hardware was affected.
How are interior finishes restored after storm damage?
Drywall damaged by water or debris is removed and replaced, joints are taped and finished to match existing texture, and paint is applied to blend repaired areas with surrounding surfaces.
Big Sky Carpentry/Remediation also performs
storm damage repair in Bozeman, Stanford, Denton, Big Timber and Livingston. The bonded and insured crew has experience with insurance-related restoration and offers free estimates within approximately 75 miles of Lewistown for residential and commercial properties requiring structural and finish repairs after wind or hail damage.
